Neat Adding A Light To An Existing Switch

Choose the fixture first.

Adding a light to an existing switch. Go to your local electrical wholesaler and see if this type of pir is still available. Rewire the 3 way the same. Connecting to a loop in rose of an existing light from an existing junction box or from a new junction box which is probably the easiest way.

I m located in the usa 1 comment. There seems to be no option to add or remove a light. You can wire the new wall light fixture into the existing light and have a single switch control both lights.

Or you can run som new cable from the light or the right hand box. This is driving me nuts. How do i add a light to an existing group.

Then pick a rectangular or round remodeling box that is small enough to be covered by the light fixture canopy. Examples include adding lighting underneath kitchen wall cabinets where the existing switch will be at the exact height of the new lighting or installing an outside light by routing the cable directly through the back of an existing switch box to the outside. A pigtail back to the switch the black wire running to the new light and the black wire running to the existing light.

You ll need enough cable to reach from the switch to the box plus about 3 ft. Wrap the black wire from the existing light fixture around one screw on the right side of the original switch. There are three ways to connect a new light and switch to the existing lighting circuits.

Wire can usually be fished into walls look for videos on youtube and you don t have to remove any drywall. The black wire running to the light is taken from the switch and spliced with. Wrap the black wire from your new light fixture around a screw on the right side of the new switch.