Impressive Control Fan And Light With One Switch

If you do not want to replace the fan itself you can also wire a single or dual micro z wave switch on top of the ceiling fan if the fan itself has a separate wire for fan and light control.

Control fan and light with one switch. Using wire strippers strip an inch of insulation from the end of the black and white wires. This way the light switch will be the master on off but then can be controlled from the hub for everything else. Now when you turn on your light switch the fan will have power.

When you splice ground wires you don t have to cap them but it s still a. Splice the black wire from the fan together with the black wire from the light and the black wire from the switch and cap them. Single wall switch wiring.

Connect the white wires together in the same way then repeat with the ground wires. With single switch wiring power to the fan is controlled by a standard single pole wall switch like a regular light switch. Get it as soon as tue dec 8.

The fan has power when the switch is on while the fan speed and the light if the fan has one are controlled by pull chains on the fan itself or by a remote control device. Double check that you have cut off the. 25 coupon applied at checkout save 25 with coupon.

Leviton 66df 10w sureslide dual quiet light. It s best to make sure your light switch is up to carrying the load of both the fan and the light. Remove the switch cover by unscrewing its small screw.

Turn on the circuit breaker at the main electrical panel. Screw the cover plate back onto the wall with a screwdriver. So please open up the wall switch box and see if you have incoming power on one of the romex black from the breaker panel and the white neutral and then you have a second romex that goes up to your ceiling fan light box.