Fun Replace Rotary Dimmer Switch
Unscrew and remove the switch plate.
Replace rotary dimmer switch. Once the light goes out you can safely remove the wall plate unscrew the switch and pull it out of the wall box. To replace a standard switch with a dimmer switch follow these steps. The dimmer switch in a room can be replaced with a flathead screwdriver and a voltage tester.
Bath electric and around the house. Disconnect the traveler and or common wires from the dimmer switch. Unscrew the switch from the electrical box and pull it out with the wires still attached.
Connect the ground wire from your dimmer to a green or bare copper wire in the wall box. Turn off the power to the switch at the circuit or fuse panel. First of all read all the instructio.
Disconnect the wires and connect them to the proper terminals on your new switch. If your dimmer switch is broken y. Part of the series.
Richard from the information you have provided yes when replacing a standard dimmer switch with a single switch simply install the single switch and connect the wires to the switch terminals. The dimmer switch has a black white wire and ground. How to change a dimmer switch to a normal switch warning.
Take extreme caution while working with electricity. If you have any doubts in any step contact a. How to fix a broken dimmer switch in your home.