Fabulous Two Dimmer Switches One Light

Martin jerry smart dimmer switch.

Two dimmer switches one light. Strip 3 4 inches of insulation from. If you re replacing two 3 way light switches at the top and bottom of a stairwell or at either end of a hallway you might think you need two 3 way dimmer switches but you actually only need one. The downsides to this plan include more wiring which could get expensive.

The key here is that you cannot install standard 3 way dimmer switches. It has the home automation system and can be used through alexa and google home voice control. Either one or two standard 3 way dimmer switches may be used to control the chandelier light fixture.

So i expect your three ways just connect to the dimmer instead of the light and the dimmer is in series reducing the power into the light. The dimmer light switch is used to turn on off and adjust the brightness. And in the light the white wire is marred to the wire that goes to the single pole switch.

I am assuming that it goes to the light since the other switch only contains one 14 2 wire which are connected to the single pole switch. To install its a neutral line is required. The dimmer switch only supports the 2 4ghz network.

This single poke switch has to be in the on position for the dimmer to work chris nov 23 19 at 19 20. If you install a spdt switch and a dimmer on one end plus a dpdt switch and dimmer on the other end then you can use the switches to determine which dimmer is hot. The two switches will be configured like a hall swich commonly known as three way where an additional runner wire is used to pass power to each switch so that at any time each one can turn it on or off.

Also it would mean having separate switches and dimmers on each end which takes up more space and might not look as nice or be as intuitive. The other switches you can have more than one must be on off switches only. Cut 4 inches of sheathing from the ends of all the cables with a utility knife.