Brilliant Wire Bathroom Fan And Light Two Switches

Prev 4 pvc inline fan.

Wire bathroom fan and light two switches. Connect the white wires together in the same way then repeat with the ground wires. The fan switch has the ground wire the. Use a wire nut to connect the panel white neutral to the neutral wire going to the fan light.

Connect a light and a fan to a new switch. In the fan light junction box connect each switched hot to one of the hot wires on the fan light. Connect the white wires in the same way then repeat with the ground wires.

Splice the black wire from the fan together with the black wire from the light and the black wire from the switch and cap them. This video with new full edited instruction for those who asked. There are also two cream wires coming out of box that i assume are for the fan.

By splicing the ground wires you don t have to cover them but. Red goes to red heater hot and white goes to the heater s white wire which should not be connected to the fan or light s white wire. Locate the switch cable which must be glued through the top or side of the box that serves the fan or the light.

Attach the red and black wires from the fan light unit to the top terminal screws on the switches. Bathroom extractor fans are usually powered by the lighting circuit and have a run on function triggered by the light switch. However because fans can be noisy or disruptive or sometimes just.

There is a black wire red one white one and the ground that is in the box. The connections from light to box are black to red wire white to white wire ground to green wire. Connect the two white wires in the switch box together with a wire nut.